Verktøy for NM-11 nr. 24 (Festeverktøy til skolisse hemper)
Verktøy for NM-11 nr. 24 (Festeverktøy til skolisse hemper)
Vanlig pris
599,00 kr
Vanlig pris
Salgspris
599,00 kr
Enhetspris
/
per
Del
Put tool number 2 (from N-21) into the hole of hook 12. Loosen the Allen screw of the tool holder 11 and fasten tool number 24. Put the outer part of the lace hook in tool number 24. Then place it in the hole on the figure skate. Position the...
Vis mer
Put tool number 2 (from N-21) into the hole of hook 12. Loosen the Allen screw of the tool holder 11 and fasten tool number 24. Put the outer part of the lace hook in tool number 24. Then place it in the hole on the figure skate. Position the skate above the hook 12 so that you can feel the tip of tool number 2 against the hole in the lace hook. (Move the skate sideways and up and down. The lace hook should be held in place by the tools.) Lower tool holder 11 and press firmly so that the outer part of the lace hook locks onto the skate.
The outer part of the lace hook should still be positioned in tool number 24. Remove tool number 2 and put tool number 3 (from N-21) into the hole of hook 12. Put the inner part of the lace hook in tool number 3 and aim it into the hole on the cracked outer part. Lower tool holder 11 and press firmly so that the inner part locks onto the outer part.
Vis mindre